BISO news

The BISO 2D VARIO series of combine headers is designed for high-performance combine harvesters that require perfect feeding of the harvested material under very different conditions. Drivers are exposed to considerable stress during harvest days in order to achieve high performance, minimal losses and also minimal wear or damage to the machine. The 2D model range gives drivers a choice and the ability to react quickly to the current harvest situation. 

The BISO 2D VARIO series of combine headers covers working widths from 7.7 m to 15.6 m. This would not have been possible without the hybrid frame and other key technologies that make this range the market leader in headers with auger. In this article, let's take a look at some interesting details that will give a better idea of the level of workmanship and technology used on this series.

The BISO 2D VARIO series of headers covers working widths from 7.7 m to 15.6 m. It is a typical representative of the BISO design school, i.e. the VARIO header with a powerful auger, with tip tilting and integrated side knifes. Of course, the hybrid frame cannot be missing at these working widths, and the reel from one piece up to the 1230 model is also interesting. It is a header for customers requiring a long service life, top quality of work and low operating costs. The target group is therefore professional farmers and, above all, contractors with powerful combine harvesters. 

Our factory, BISO in Slovakia, Nováky and the long-awaited meeting on 27.11. 2022. Thanks to AgroVario Kft. from Hungary for coming despite the long journey and therefore we could show them our manufactury. Come with us to see how it went. 

SAMPO has introduced a completely new combine, the COMIA C22, on the market at the last AGRITECHNICA in Hanover. It´s a brand-new hybrid model from SAMPO. SAMPO Rosenlew, P&L Czech Republic and Készenlét Zrt. Hungary ordered two BISO CropRanger VX750TLL vario headers for their demo units which were then used in the Czech Republic, Hungary and Baltics this season. We thank them a lot for nice pictures and some videos.

VOMER AGRO, our partner from Latvia, hung our BISO Crop Ranger VX750TLL on their Rostselmash RSM161 combine in nearly full specification and made a DEMO tour around Latvia and Estonia. The vario header was ordered in full specification with the Schumacher kit and the BISO ProfiTrailer. Look at some pictures and videos from Latvia. Thanks a lot to the staff at VOMER AGRO for a very professional cooperation.

It is a very pleasant feature for the 9m header, it is good to have it on the 10.7m one, and for the 12.3m one it is a “MUST HAVE”.  We are speaking about the rear axle steering on the header trailer. Let’s look at the BISO ProfiSteer trailer for big headers and comfortable drive. How does it work?

The traffic control on field becomes strategic in the modern farming to reduce the soil compaction and increase the efficiency. The machineries become bigger and bigger and their performances too: nowadays are available 18 meters seeders and 36 meters sprayers. Those equipments are used in areas with big fields with the purpose to increase the field work efficiency and to reduce the soil compaction by using the same path for the different working phases (seeding, spraying, harvesting, etc.). This approach is becoming popular in Western Australia where the possibility to work on multiple of 18 meters is strategic since it will reduce by half the current wheeled area. The main constraints to reach the multiple of 18 meters working width was standing on the following aspects:

• Cutting tables for combine harvesters could reach a maximum of 13.7 meters;
• Uniform straw spreading on headers larger than 12 meters was not possible;
• Combine unloading with headers wider than 13.7 meters was difficult.

Today all above constraints have been resolved and for the cutting table, BISO with its 3D VARIOFLEX AIR i represents the answer to the combine front equipment as stated in the article which was published last 05/07/2020 in the CTF Magazine hereinafter presented.

The key issue for a long lifetime of the header is a strong frame and a good trolley for header transport. The high quality header will not be recognized after one year in service, but after 10.000ha harvested and thousands of kilometers of transport on the header trailer. The steel header works well up to maximum 9m. And our steel frames apparently survive the most. The only solution is something we in BISO after years of research and development call the HYBRID FRAME.  

At the Agritechnica 2019 trade fair, we were visited by several world newsrooms which were interested in our innovative products. Below, we add you a contribution that was presented by the Argentinian television Canal Rural.

The worldwide exhibition Agritechnica 2019 is over and we, as BISO, can say that it was very successful! We also received a significant silver medal award for our new innovative product BISO VARIOFLEX 3D AIR i

Our greatest delight was when hundreds of customers came to our exhibition and admired the presented machines with us.

Above all, we would like to thank to our customers and business partners who came from all around the world.

It was again a very pleasant time spent discussing the technical solutions of our header but also the everyday problems of every farmer.

An efficient and relaxed harvest begins with the premium header. Premiums will include models that can harvest not only cereals, rape or soybeans, but also laid wheat or barley in the FLEX mode, even in shots over 9m. And all this with a precise cut at the required height in every situation.

The German national agricultural company DLG awarded us a silver medal for the BISO 3D VARIOFLEX AIR i header on the occasion of the upcoming AGRITECHNICA HANNOVER 2019 exhibition.

We have been working on the new 3D generation header for many years. We have had several developmental generations and based on detailed analyses, many tests and measurements, we and our customers have come to the conclusion that the future is a combination of intake auger, VARIO system and FLEX cutting deck module.

Did you know that in the picturesque town of Ort im Innkreis, BISO Schrattenecker has taken another step forward, as it has in its slogan? Yes, that's right, and maybe you can say up to three extra steps. Sure, it may sound a bit like praise in my words, but it's not so. The independent German institute DLG itself rewarded us for these three steps, and we are proud of it. It is not a rule that small factories are awarded at prestigious international agricultural exhibitions such as Agritechnica 2009 in Hanover. However, we managed it last year again.

Are you looking for a machine urgently? Take a look at our stock file.